Ride-On Power Asphalt Sprayers
240 Gallon Capacity
PAS240R-R 
These units have been designed for the quick and efficient application of rejuvenating sealers and asphalt cutbacks. The material tank will hold up to 240 gallons and the rear spray bar is easily activated by a finger-tip controlled toggle switch mounted on the drivers console to maximize productivity and material control.
Features & Benefits
- This rugged ride-on spray unit is built on an industrial grade chassis and is designed to provide years of trouble free service.
- 10” diameter lid assembly provides quick and easy filling of material tank.
- Easy to adjust pressure relief valve offers quick adjustment of spraying pressure to optimize material performance.
- Conveniently located, adjustable spray bar provides even distribution of material while minimizing over spray.
- Each nozzle is equipped with a shutoff valve to fine tune the application of sealer to specific conditions.
- Clogged pumping systems and nozzles are virtually eliminated with a standard basket strainer.
- Dual rear view mirrors provide a safe view of the rear of the vehicle.
- Air pressure for shutoff valve control is provided by a self contained air compressor complete with pressure regulator and reservoir tank.
- The spray bar is activated by a remote control on the vehicle's dashboard.
- Dash mounted gauges monitor fuel level, voltage, hours run and control system air pressure.
- The pumping system is powered by a reliable 11hp Honda engine, driving a 25 gpm pump.
- A tank lift system provides easy, safe access to the engine compartment for routine maintenance of the vehicle.
- Maximum vehicle speed is 22mph.
- Increased corrosion resistance with epoxy primer and standard blue paint finish.
NOTE: This unit is not a motor vehicle as defined in the National Traffic Vehicle Safety Act and is not implied for licensing as a motor vehicle or for usage on roads, streets and/or highways.
Options
- 24” wheeled curb edger with 2 spray tips.
- Strobe light.
- Customers choice of paint colour.
PAS240R-R 
Models |
PAS240R-R
(for rejuvenating sealers) |
PAS240R-C
(for asphalt cutback, Gilsonite, etc.) |
|
RIDE-ON VEHICLE: |
|
Shipping Weight |
2334 lb (1061 kg) |
2334 lb (1061 kg) |
|
Engine |
22hp Kohler. |
Dimensions
Height:
Width:
Length:
Length: |
Unit Without Spray Bar
53” (1346 mm)
58” (1473 mm)
128” (3251 mm)
Spray Bar (varies)
88” (2235 mm) and up
|
Unit Without Spray Bar
53” (1346 mm)
58” (1473 mm)
128” (3251 mm)
Spray Bar (varies)
80” (2032mm) and up
|
|
Drive System
Suspension |
6 speed transmission (hi-lo range).
Heavy duty multi-leaf rear suspension and Dual coil springs, dual shocks on front suspension. |
TANK AND SPRAYING SYSTEM:
Capacities
Loading Height
Material Tank
Flushing Tank
Engine
|
53” (1346 mm)
240 gal. (1089L)
6 gal. (23L)
11hp Honda
|
53” (1346 mm)
240 gal. (1089L)
N/A
11hp Honda
|
|
Fuel Capacity
Brakes
Electrical |
7 gallons (26 Liters).
4 wheel hydraulic drum brakes.
12 volt battery, 25 amp. alternator, electric start with clutch safety switch, twin halogen headlights. |
Pump |
25GPM |
25GPM |
|
Body |
Plastic cowl, fenders and hood. |
Spray Wand Assembly |
N/A |
4ft. hand held wand with spray gun and shut-off valve, 100ft.
hose and hose reel. |
|
Steering |
Front wheel power steering; automotive type 14” steering wheel with tilt mechanism. |
Spray Bar Assembly |
Air operated. |
Air operated. |
|
Main Frame |
Welded steel frame construction, mid engine placement. |
Asphalt Rate Meter
Hose Reel |
Standard
Optional |
Optional
Standard |
|
Drive Controls |
Foot operated accelerator, clutch and brake Pedals; shift lever with H-shift pattern. |
Specifications subject to change without notice.
|
